Pre-calibrated Module for Methane Gas FSM-T-01 Replace the model NGM2611
1 Gas concentration is digitally and quantitatively
output by means of communications
2 Alarm output can be set through programming
3 Factory calibrated, temperature compensated
4 Compact size, low cost
1 Front-end solution for methane gas alarm
2 Simple methane gas alarm output
FSM-T-01 is a pre-calibrated module for methane gas alarm which applies TGS 2611 sensor together with optimized classic circuit measuring methane gas concentration. The module is pre-calibrated by Figaro's highly accurate calibration equipment and manufactured with mature aging process.
The purpose of the module design is to save the development and production cost of the user to its greatest extent, making it easier and more convenient for them to manufacture gas alarm for civil natural gas.
The module is designed with two different interfaces considering the convenience for use. TTL level’ s asynchronous communication interface allows the user to read real time gas concentrations with very simple commands;also different alarm thresholds can be set through communication programming. When the gas concentration reaches set value alarm
output signal would be generated automatically from the alarm terminal.
Besides , this compact sized module applies a socket type design which facilitates regular replacements of the sensors. For some main board, different modules can also be replaced simply by plugging and pulling out, fulfilling the functions of detection and alarming for methane and other gases.