Main camp product:oxygen sensorGas sensorHumidity sensorHTG3515Carbon Dioxide SensorCarbon Monoxide Sensor
[

Temperature and Humidity Sensor with PTFE membrane - HTU21DF

]
sendmsg
ProductName: Temperature and Humidity Sensor with PTFE membrane - HTU21DF
ProductModel: HTU21DF
ProductManufacturer: Humirel
ProductSimpleIntroduce
HTU21DF, the new humidity and temperature sensor of MEAS is about to set new standards in terms of size and intelligence: Embedded in a reflow solderable Dual Flat No leads (DFN) package of 3 x 3mm foot print and 1mm height it provides calibrated, linearized signals in digital, I²C format.


Temperature and Humidity Sensor with PTFE membrane - HTU21DF  detail

HTU21DF Temperature and Humidity sensor with PTFE membrane

HTU21DF Temperature and Humidity Sensor DESCRIPTION
HTU21DF, the new humidity and temperature sensor of MEAS is about to set new standards in terms of size and intelligence: Embedded in a reflow solderable Dual Flat No leads (DFN) package of 3 x 3mm foot print and 1mm height it provides calibrated, linearized signals in digital, I²C format.

HTU21DF sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module humidity and temperature digital outputs. HTU21DF sensors are low power consumption designed for high volume and cost sensitive applications with tight space constraints.
 
Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip – which can be read out by command.

Furthermore, the resolution of HTU21DF sensor can be changed by command (8/12bit up to 12/14bit for RH/T), low battery can be detected and a checksum improves communication reliability.

With made improvements and the miniaturization of the sensor the performance-to-price ratio has been improved – and eventually, any device should benefit from the cutting edge energy saving operation mode.

HTU21DF Temperature and Humidity Sensor Parameters:
• storage temperature: -40 to 125ºC
• supply voltage: 3.8Vdc
• Humidity Operating Range: 1-100%RH
• Temperature operating range: -40 to 125ºC
• VDD to GND: -0.3 to 3.6V
• Digital I/O pins (DATA/SCK) to VDD: -0.3 to VDD+0.3 V
• Input current on any pin: -10 to +10 mA

HTU21DF Temperature and Humidity Sensor Features:
• DFN type package  
• Relative Humidity and Temperature Digital Output, I2C interface 
• Fully calibrated 
• Lead free sensor, reflow solderable
• Low power consumption 
• Fast response time and very low temperature coefficient
• with PTFE membrane
Leave a message for product
Title
Contact
Tel
Content
Verify Code
Click to change
Note:1. Shortcut key for send message :Alt+s or Ctrl+Enter!
2. If necessary, please leave your detail contact!


Shenzhen xinshilian Technology Co., Ltd.
Tel :86-0755-83680810 83680820 83680830 83680860    Fax:0755-83680866
Address:Room 712, Huaneng Building, Shennan Zhong Road, Shenzhen 518031, China  PostCode:518031
 

粤公网安备 44030402001455号