Airflow Sensors AWM5000
In-Line Flow Measurement
AWM5000 Series Microbridge Mass Airflow Sensors feature a Venturi type flow housing. They measure flow as high as 20 standard liters per minute (SLPM) while inducing a maximum pressure drop of 2.25" H2O. The microbridge chip is in direct contact with the flow stream, greatly reducing error possibilities due to orifice or bypass channel clogging.
0 SLPM to 10.0 SLPM
Output Voltage at Trim Point
5.0 Vdc @ 10 SLPM
±0.50 % Reading
60 ms max.
8.0 Vdc min., 10.0 Vdc typ., 15.0 Vdc max.
100 mW max.
1) Linear voltage output
2) Venturi design
3) Remote mounting capability
4) Active laser trimming improves interchangeability
5) Separate gas calibration types: -Ar (argon); -N2 (nitrogen); -CO2 (carbon dioxide)
Damper control for heating, ventilation, and air conditioning systems
Gas analyzers; Low vacuum control; Process control ; Medical respirators and ventilators; Oxygen concentrators; Leak detection equipment; Vent hoods; Anesthesia control; Gas metering; Gas chromatography